How to change Ethernet port on VG710 to a WAN port
- Go
to Network>>VLAN>>configure VLAN parameters, then change the
port needs to be WAN to a different VLAN.
- Go
to Routing>>static routing>>static routing, then create a
routing rule like following. Link with smaller distance will have higher
priority.
- Go
to Services>>DHCP>>DHCP server, disable whatever DHCP server you
have there. Click OK then apply.
- Then
go to DHCP Client, enable VLAN2 as a DHCP Client.
- go back to DHCP Server, then re-enable the DHCP Server for bridge 1.
- go to Firewall>>ACL, add a duplicate of ACL #100, change the ID number to any number not in use. 101 is used in following example.
- Go to Firewall>>NAT, add an ACL-to-Interface SNAT using the ACL created in step.6 for VLAN2.
0 comments
To reply to the article, please Login or registered
